Detroit Locker TrueTrac
Notify me when back in stock!
Detroit Locker TrueTrac
All Eaton differentials made for General Motors 8.5" and 8.6" axles require special bearings. For axles with small bearing bores (race O.D. or 2.89"), usually found on vehicles prior to 1999, bearing LM102949 and race LM102911 are required. For axles with large bearing bores (race O.D. of 3.06"), usually found on vehicles from 1999-2013, bearing LM603049 and race LM603012 are required. Manual locking hubs recommended for front axle applications.
- GM 8.5. /8.6IN
- 30 SPLINE
- 2.73 AND UP
| Model year start | Model year end | Vehicle make | Vehicle type (model) | Axle location | Axle description | Gear ratio |
|---|---|---|---|---|---|---|
| 2006 | 2009 | Hummer | H1, H2, H3 | Rear | H3 | 2.73 & up |
| 1988 | 1996 | General Motors, Chevrolet, Pontiac, Buick, Oldsmobile | Passenger Car | Rear | GM 10 bolt C-Clip | 2.73 & up |
| 1988 | 2013 | General Motors | Three Quarter-Ton Truck | Rear | GM 10 bolt C-Clip | 2.73 & up |
| 1988 | 2007 | General Motors | Half-Ton Truck | Rear | GM 10 bolt C-Clip Van | 2.73 & up |
| 2005 | 2007 | Saab | 9-7x | Rear | 8.6 | 2.73 & up |
(EAT913A481)
| SKU | EAT913A481 |
| Brand | Eaton |
| Shipping Weight | 10.0000kg |
| Shipping Width | 0.300m |
| Shipping Height | 0.300m |
| Shipping Length | 0.300m |
| Shipping Cubic | 0.027000000m3 |
Be The First To Review This Product!
Help other Konect Group Pty Ltd users shop smarter by writing reviews for products you have purchased.
